NEWS CENTER

 Coconut shell activated carbon is an activated carbon produced from coconut shells. It has the characteristics of porosity, strong adsorption capacity, good filtration performance and antibacterial properties. It plays an important role in air purification and water treatment. In order to maximize its effectiveness, the following are some suggestions on how to use coconut shell activated carbon correctly:

Make sure that the coconut shell activated carbon you buy is of reliable quality and meets relevant standards. You can judge its quality by checking the product description, production date, manufacturer and other information.

 Although coconut shell activated carbon does not produce dust during use, it is recommended to clean it properly before the first use to remove impurities on the surface. Note that tap water cannot be used directly for cleaning, because tap water may contain chemicals such as bleaching powder, which will damage the activated carbon and affect the adsorption rate. It can be cleaned with pure water or treated water.

In terms of air purification and water treatment, in order to enhance the adsorption effect, it is recommended to spread the coconut shell activated carbon and avoid piling it up. This can increase the contact area between the activated carbon and the air or water and improve the adsorption efficiency. Coconut shell activated carbon will gradually become saturated and lose its adsorption capacity during use. Therefore, it needs to be replaced regularly to ensure its continued effectiveness. The replacement cycle depends on factors such as the use environment and the degree of pollution. It is generally recommended to replace it every once in a while (such as 3 to 6 months). For coconut shell activated carbon used for air purification, it can be taken out and dried every once in a while (such as about 15 days) to restore its activity. When drying, you can choose a sunny place and avoid doing it on rainy days.

 Coconut shell activated carbon should be stored in a dry and ventilated place, avoiding direct sunlight and high temperature. This can extend its service life and maintain its adsorption capacity. A humid environment will reduce the adsorption capacity of coconut shell activated carbon. Therefore, during use, be careful to avoid moisture in the activated carbon.

 The correct use of coconut shell activated carbon requires attention to its quality, cleaning, placement, replacement cycle, storage and maintenance. By following these recommendations, you can ensure that coconut shell activated carbon can play its maximum role and provide people with fresh and healthy air and clean and sweet drinking water.

• Prev：What are the advantages of the continuous carbonization machine's process of carbonizing first and
• Next：Back to List