Mesh Belt Dryer For Briquettes

Charcoal briquette mesh belt dryer is a drying equipment that uses steel mesh as a conveyor belt to carry materials for continuous drying. The main heating methods include electric heating, steam heating, and hot air heating. Since the conveyor belt is mesh-shaped, it is especially suitable for drying flake, strip and granular materials with good air permeability, and for regular or irregular lumps such as filter cake paste materials (such as: coal, Charcoal briquettes, various mineral powders, food, vegetables, etc.) are more suitable.

Finished Charcoal Powder

Applicable Materials

The equipment uses sawdust, shavings, wood scraps, branches, rice husks, peanut shells, sugar cane, cotton stalks, corn stalks, wheat straw, rice straw and other crops in the north and south are used as raw materials. Using our new carbonization technology, ideal carbon powder can be obtained, or the carbon residue left when making charcoal briquettes can be obtained. It can be crushed, milled and stirred, and pressed into shape.

Equipment Warrior

The charcoal briquette mesh belt dryer equipment is mainly composed of air inlet unit, exhaust unit, circulating air unit, mesh belt (chain plate), dehumidification system, feeder, transmission mechanism, control system and other components. The briquettes in the hopper are evenly spread on the mesh belt by the feeder, and are dragged by the transmission device to move in the dryer. The drying section is composed of several units. The air is blown in by the blower, and becomes hot air through the heat exchanger to pass through the material layer. , Most of the gas circulates, and a part of the gas with lower temperature and higher moisture content is discharged by the humidity exhaust fan as waste gas.

Parameters

Model	Number of unit	Belt width(m)	Length of drying section(m)	Thickness of raw material(mm)	Operation temperature(°C)	Drying time(h)	Overall dimensions
Model	Number of unit	Belt width(m)	Length of drying section(m)	Thickness of raw material(mm)	Operation temperature(°C)	Drying time(h)	L(m)	W(m)	H(m)
WDG1.0-6	1	1.0	6	10～40	30～200	0.1～1.0	8.5	2.1	2.1
WDG1.0-8	2	1.0	8	10～40	30～200	0.1～1.0	10.5	2.1	2.1
WDG1.5-8	2	1.5	8	30～100	50～300	0.2～2.5	11.8	3.1	4.1
WDG1.5-12	3		12				15.8
WDG1.5-16	4		16				19.8
WDG1.5-20	5		20				23.8
WDG1.5-24	6		24				27.8
WDG2.0-9.0	2	2.0	9	30～200	80～350	0.5～3.0	12.8	3.6	4.1
WDG2.0-13.5	3		13.5				17.4
WDG2.0-18	4		18				21.8
WDG2.0-22.5	5		22.5				26.4
WDG2.0-27	6		27				30.8
WDG2.0-31.5	7		31.5				35.4

Features and Advantage

1. Equipped with an automatic tensioning device, the chain plate runs smoothly and can be turned over freely, thus solving the phenomenon of chain dropping, chain jamming, and deviation.

2. The sieve plate is made of heat-resistant steel punched into long strips, which has high strength, no deformation, and good air permeability. The chain plate of the briquette dryer

equipment is driven by a speed-regulating motor, which can adjust the operating speed and control the drying time according to the humidity of the freshly pressed briquettes.

3. The temperature of each section inside the body is digitally displayed, which is convenient for the dryer operator to grasp and control the temperature inside the kiln.

4. There is a slag scraping groove at the bottom, and the pulverized coal falling into the bottom of the dryer is automatically scraped by the slag scraper, which realizes automation and saves manpower

5. There is a maintenance channel for each section, which is convenient for equipment maintenance.