Biomass Pyrolysis Machine is a professional equipment for continuous high-temperature heating and carbonization of biomass under anaerobic and oxygen-poor conditions. It consists of a two-layer carbonization machine, a pre-burner (or gasification furnace), and combustible gas purification It consists of device, external heating furnace of carbonization machine, feeding conveyor, cooling carbon machine and control. The biomass is transported by the conveyor into the inner drum. The waste heat in the furnace is used to dry and preheat the material to 200-250°C. It then enters the outer drum for high-temperature carbonization. There is a combustible gas recovery pipe at the end of the outer drum to complete the carbonization process. The CO, CH₄, C₂H₆ and other gases produced in the flue gas purification system separate the wood tar, wood acid liquid, water and ash substances to obtain pure combustible gas. The wind is sent to the external heating furnace of the carbonization machine, fully burned, and heated to the carbonization machine. , to achieve the purpose of reciprocating heating, carbonization, and continuous production. The carbonized product is discharged through a water-cooled charcoal discharge machine, and the carbonization ignition is supplied with heat by a preheating burner (or gasification furnace).

• Screw Conveyor

  Feeding device, conveying materials.

• Carbonization Machine

  High-temperature, oxygen-free carbonization.

• Purification Unit

  Purify gas, recycle and reuse.

• Reuse Syngas for Heating

  Lignite biomass, heating burning room.

• Cooling Discharger

  Output cooled charcoal powder.